Position |
Front Left |
Car Model |
E-CLASS (W211) |
---|---|---|---|
Spring Material |
Rubber & Aluminum & Steel |
Spring Type |
Air Spring |
Size |
Original Standard | Shock Absorber Type | Hydraulic air Shock Absorber |
Damping Force Direction |
Single Effect |
Orignal Equipment |
2113209513 2113201938 |
Usage |
Auto |
Part |
Air Suspension |
Specification |
84*20.5*21CM |
Product Description
The air suspension shock is ready for immediate installation. It consists of an air spring, a shock absorber and an electromagnetic ADS control valve. All modules of our air-suspension struts are new high-performance parts.
In terms of safety, accuracy and quality, the air shock assembly corresponds to the originally installed component. This is because it is produced exactly to the specifications for this Mercedes. Production is subject to expert control in Germany. Comfort and driving safety are fully restored when this part is fitted to the car. For models with four-wheel drive, there is a special version, which you can also purchase in our shop.
The optionally available air suspension ensures particularly good ride comfort, as the air spring responds more easily to bumps than the otherwise fitted mechanical springs. In addition, the semi-active air suspension system introduced with this model can control the suspension and damping separately for each wheel. Part of this air suspension is the active damping ADS, which adjusts the attenuation in a fraction of a second according to the road condition.
Points For Attention
Avoid Additional Costs in Case of Leak
Air struts are durable, but the constant loads sometimes lead to defects after high mileage and environmental influences. A common damage to the air strut is a leak. If the air spring on the shock absorber leaks, the vehicle can lower itself overnight on the front axle. If only one side is affected by pressure loss in the vehicle, then it lowers unilaterally in the front. The compressor runs constantly as it works against a declining compression. Therefore, the compressor will overheat and even let moist air through the system, overburdening the integrated dryer. If you don't renew the air suspension shock on time, the compressor will soon malfunction. This will cause extra costs that could be spared with a timely replacement of the air strut.